Description
Product Ref. No.: PPM15-PC
PRIME PACK PNEUMATIC CRIMPING MACHINE FOR PUMPS
The PNEUMATIC CRIMPING MACHINE FOR PUMPS is used for sealing all types of glass perfume bottles. After sealing, they can maintain a good sealing performance. The work and control system of this machine adopts pneumatic technology.
Specifications:
| Model No. | PP-PN-PCM100 |
| Type | Pneumatic |
| Air Pressure | 0.4~0.6MPa |
| Bottle Neck Size | FEA 13mm—21mm Crimping Head |
| Working Speed | 200-250 bottles/hour |
Why should you buy PRIME PACK PNEUMATIC CRIMPING MACHINE FOR PUMPS?
Buying our machine provides a lasting competitive edge. Its unparalleled durability and superior performance not only exceed cheaper alternatives but also promise enduring value, ensuring your success in the long run.
This is a pneumatic controlled machine which requires a small size compressor. This machine is employed to crimp various types of perfume bottles, ensuring they maintain effective sealing performance. After the sealing process, the bottles remain securely sealed.
Initial Installation Process For PNEUMATIC CRIMPING MACHINE FOR PUMPS:
- Ferrule Height Adjustment For Perfume Pump On Crimping Head
Adjust the crimping head according to the pump ferrule height
- Locate the screw on the crimping head and you will find a lock nut/chuck nut. Loosen the lock nut and remove it.
- Underneath, you will find a positive shape screw. Place the screwdriver in the screw.
- Flip the side of crimping head.
- Then place the ferrule pump in the crimping head, so your ferrule pump is a little bit (0.5mm) inside the crimping head, as it shouldn’t touch the top surface of crimping head.
- Then hold it in this position and lock it with lock nut.
For different types of pumps, you’ll have to adjust the ferrule height each time. If you do not adjust when using different pumps from different suppliers, then it will not crimp properly.
- You have to fix the height according to your bottle size every time before you use the machine.
- Press the pneumatic machine pedal to bring crimping head down, then close the air.
- Adjust the height up or down according to your bottle size by twisting the lever and put it on the crimped bottle neck*
- Once you got the required height, release the air, and the machine will automatically set it.
- You can now use the machine.
*Please adjust the height carefully as the bottle might break or the required operation won’t work properly.
- Adjusting the bottle alignment allows you to move the bottle front and back to align with the crimping head. To adjust, twist the screw accordingly.
How to Use PRIME PACK PNEUMATIC CRIMPING MACHINE FOR PUMPS?
- Connect the Air Inlet Valve.
- Connect Air Hose with your Air Compressor and the Machine
- Turn on the left and right valves and adjust the air source pressure to 0.5Mpa.
- Adjust the crimping effect to make it tighter or looser.
- The glass bottle should be placed upright under the crimping head.
- Use the foot pedal to operate the machine.
Reviews
There are no reviews yet.